4 inches Rubber Stopper

4 inches Rubber Stopper

4-inch Rubber Stopper has a more compatible outside tube diameter and has 4 inches in size with a wall thickness. They fit in holes that have a diameter of 3.53″-3.8″. Its multiple flexibilities ensure it will be easily installed and secure fit. 4-inches has more size due to which it cannot be easily flawed by chemicals, air pollution, and other resources of flawing it. It is a waterproof, shockproof, and UV-resistant product that can bear all these but cannot permit to go inside. It is made from long-lasting plastic material that is for all the time and not to be a flaw. There is wide use of it, household, outdoors, furniture, fences, racks, vehicles. Its color is black, and its diameter is 4-inches.
The 4-inch size of rubbers is also used in PVC pipe that fits on the pipe easily. So, let’s get some information about PVC pipe where we can use a 4-inch rubber stopper. Its size already we know, the material is PVC (Polyvinyl chloride) that is abbreviated Polyvinyl Chloride, the brand is Spears Manufacturing, item dimension is 5 x 5 x 2.5 inches, i.e., 5-inch height, 5-inch width and 2.5 in length. Its weight is 0.79 Pounds. You have been told about this item because of the 4-inch rubber stopper. Now examine some bullet points of it;
PVC plastics are used in the construction of it. It has a design similar to a Cap that can be easily fit on the pipe. It has great sprinkler applications. It is stronger if we use PVC Primer and Glue to attach with the pipe. It was the product that introduces a 4-inch Rubber Stopper. When we fit it on the pipe, it will overlay all the front paths and not permit anything to go ahead.

All dimensions are in mm​

Stopper & Plug Size Catalog

Compare four stopper profiles and check the selected part dimensions against your opening and available depth. Each profile has its own drawing and dimension meanings.

Custom colors are available to your Pantone color code. Include the code in your inquiry.

Blind-Hole · RSTTapered · RSAUndercut · RSBT-Shaped · RSD

RST T-Shaped Plugs

Match stem diameter A, flange diameter B, stem length C and flange thickness D. E refers to the underside recess; use the selected row and approved drawing to confirm the actual profile.

Dimension guide

Product appearance

PartNo.	A（mm）	B（mm）	C（mm）	D（mm）	E（mm）
RST2.5-5.5-5.3	2.5	5.5	5.3	2	0
RST2.7-5.5-5	2.7	5.5	5	2	0
RST3-4.3-4.5	3	4.3	4.5	0.8	0
RST3-7-7	3	7	7	2.2	0
RST3.3-6.5-6	3.3	6.5	6	1.5	0
RST3.5-6.5-6	3.5	6.5	6	2	0
RST3.8-7-10.5	3.8	7	10.5	1.5	0
RST3.8-7-7	3.8	7	7	1.5	0
RST3.8-7-6	3.8	7	6	1.5	0
RST4-7.5-6	4	7.5	6	2	0
RST4-9.5-7	4	9.5	7	2.5	0
RST4.3-8-6	4.3	8	6	1.5	0
RST4.5-7.5-6	4.5	7.5	6	2	0
RST4.8-6.8-3.6	4.8	6.8	3.6	0.9	0
RST4.8-9-7	4.8	9	7	1.5	0

Need a different fit? Share the opening dimensions, mating profile and intended use for a custom size.

Discuss Your Requirements