Black heavy duty silicone tubing
No matter the purpose that you are buying a product like this one, it can serve you for many things. Black heavy duty silicone tubing can be used to prevent damage on the wires if you plan on using it this way because it has hard walls that will keep the cables intact without letting sharp edges strip them down or cause any type of damage. This is really important in the electronic industry and especially in the automobile industry since there are a lot of cables and each one has a different purpose so damaging one can be a very hard problem to diagnose.
Because of the rigidity of the heavy duty silicone tubing, it can be used to protect cables that will go through when you plan on routing them in tight spaces where they can be squeezed and damaged. The black color masks everything down so it looks better than having multiple wires hanging around. The black heavy duty silicone tubing is really good when it comes to heat resistance because the walls are thick and it will offer better protection of whatever you plan on routing inside, especially if it next to a heat source, for example, the engine.
There are a few factors that you will need to consider when getting a black heavy duty silicone tube for your project. The first factor is length. Specifically, how long you need your tube to be so your wires can be protected all the way. Keep in mind that it is better to buy a slightly longer black heavy duty silicone tubing because you can cut it if needed. The second factor is the wideness of the tube because you will want to fit all your cables inside. You should measure everything before buying to make sure that everything will be perfect.
Silicone Tubing Size Catalog
Compare inside diameter, outside diameter and listed wall thickness across silicone tube ranges. Confirm the material grade and application requirements for the selected part.
Food grade silicone tube
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Black silicone tubing
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Industrial silicone tube
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Colourful silicone braided tube
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Food grade silicone braided tube
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Need a different size? Share your drawing, mating dimensions and intended use to discuss a suitable part.
Discuss Your RequirementsProduct specifications
- Product form
- Hollow elastomer tubing for a fitted line or sleeve
- Material
- Silicone. Specify the compound grade for the selected service.
- Application focus
- Cable sleeving and vehicle hose runs. Size the part against the selected assembly.
- Dimensions to confirm
- Inside diameter, outside diameter, wall thickness and cut length. Match these to cable sleeving and vehicle hose runs.
- Mechanical duty
- State the external loads, pressure cycling and wear locations; identify any reinforcement needed for that duty.
- Color reference
- Black. Approve the shade on the selected compound and finished surface.
- Line layout
- Check bend radius, unsupported spans and clearance at both connections.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]