Rubber dust boot
In the area of protecting our equipment and systems, there are some frequently considered hazards. The weather is the usual one as outside equipment will frequently be exposed to rain, wind, and snow. However, the smaller but no less important factor that affects both outside and inside equipment is dust.
While dust may be extremely small, it can accumulate and form debris in even the most formidable of machinery. It’s also important to note that dust can carry certain materials with it and help them accumulate within the machinery. Thankfully, we have ample protection for our more sensitive systems when it comes to dust. This protection is achieved through the use of a rubber dust boot. Each segment of the system that can be protected by this item will be secured from dust due to the rubber dust boot’s simple fit and long-lasting protection. They are often used in suspension systems but their proper use can be extended to any item that can fit the rubber dust boot. The rubber composition of the item makes it rather resistant to the machinery itself, being able to resist grease and oil with no issues. A great aspect of the item is its convenience. You needn’t spend too much time installing it onto the piece you want it on, they can be slotted onto it with very little issue.
The broad usage of the rubber dust boot also means a lot of available variants. This can make the correct size hard to find. However, you needn’t worry. In our catalog, we offer plentiful different measurements that will fit your need. If you are having issues finding the correct one, contact us and we will see that you get the dimensions that you require. After all, customer satisfaction is important to us which is showcased by our high-quality items and reinforced by our responsiveness.
Product specifications
- Product form
- Flexible protective boot with a moving section
- Application focus
- Suspension or steering joints. Size the part against the selected assembly.
- Dimensions to confirm
- End interfaces, free length, compressed length and extended length. Match these to suspension or steering joints.
- Exposure to evaluate
- Outdoor weather, dust or debris and oil splash. Validate the selected material under the combined conditions.
- Movement discussed
- Axial compression and extension. Check fold clearance at both travel limits and define the cycle requirement.
- Motion envelope
- Define axial travel, articulation and clearance around the folds throughout the stroke.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]