Engine isolator mounts

Engine isolator mounts

The engine isolator mounts are the parts of your vehicle motor that provide support in keeping the device in place, and they also protect it from shock and vibrations. As you already know, the parts in your motor are closely put together, and when they bump into each other when there is too much friction, and when the vibrations are too high, this could easily lead to a health and safety hazard. In addition to this, even if there is no evident safety hazard, as the parts continue vibrating and moving around, they will get damaged or broken. The main purpose of the engine isolator mounts is to dampen those vibrations and to protect the engine from any harm. 

There are different types of engine isolator mounts and they come in different shapes and sizes. The most commonly used ones are the flat ones that serve as a buffer in between the parts. They are easy to install and replace in your devices, and they will not get damaged easily no matter the conditions they are exposed to. The engine isolator mounts are usually made of rubber, as this material will not get damaged when it comes in close contact with all the different types of oils and fuel that might be found around the engine. Note that even if they get wet and are in constant contact with moisture, will not break or tear, and most important of all, they will not rot or mold.

The engine isolator mounts are easy to maintain and clean, and they will serve their purpose for years to come without needing a replacement. As manufacturers, we can aid you in picking the right size, model, and design, and you can reach out to us if you are interested in a custom design, or if you want to know all of your options. 

Vibration Mount Size Catalog

Compare five mounting arrangements using the matching drawing, thread and dimensional data. Load and compression columns retain their stated units; confirm operating conditions for your installation.

Type AType BType CType DType E

Vibration Damping Mounts A

Match D, H and thread d to the drawing, including stud length L. Dimensions are in mm; thread designations, load in kg and compression in mm follow the table headings. Confirm load direction and operating conditions for your installation.

Dimension guide

Product appearance

Part NO.	D	H	d	L	Max Load Weight (kg)	Maximum Compression(mm)
VMA1001	8	8	M3	6	8	1.5
VMA1002	8	8	M3	10	8	1.5
VMA1003	10	8	M3	6	10	1.5
VMA1004	10	8	M4	6	10	1.5
VMA1005	10	8	M3	10	10	1.5
VMA1006	10	8	M4	10	10	1.5
VMA1007	10	10	M4	6	10	2
VMA1008	10	10	M4	10	10	2
VMA1009	10	15	M3	6	10	2
VMA1010	10	15	M4	6	10	2
VMA1011	10	15	M4	10	10	2
VMA1012	15	8	M4	10	18	2
VMA1013	15	8	M5	10	18	2
VMA1014	15	8	M4	12	18	2
VMA1015	15	8	M5	12	18	2

Need a different size? Share your drawing, mating dimensions and intended use to discuss a suitable part.

Discuss Your Requirements