Generator vibration mounts

Generator vibration mounts

Generator vibration mounts for generators are made of high-quality rubber that melts and shapes in molds. They are absolutely adapted to the bottom of the generator. Depending on the power and weight of the generator, these insulators can be reinforced with a steel base. Certainly, there is a very durable rubber around the steel base.

Vibrations in generators can cause various damages in generators. They can damage part of the generator, damage the floor, or the machine on which the generator is located. Generator vibration mounts can reduce generator life, produce excess noise and simply reduce generator efficiency.

Anti-noise supports, especially those reinforced with steel, are a permanent solution for vibration absorption. They are very easy to mount, and when attached to the generator, they can also be used for compression. The carriers absorb and dampen vibrations, and reduce their negative impact. They act as a cushion between the two parts that need to be insulated.

These insulators have threads, ie the so-called male and female part, which serves to completely fit the insulator into the generator body. These threads reduce the installation time of the insulator and increase the life of the generator. The rubber is resistant to wear and various temperatures. Also, these resistors are resistant to all petroleum-based fluids, which reduces maintenance time and costs.

The manufacturers have taken care to make different types of insulators for generators, depending on the strength and weight of the generator itself. Which type of insulator will be suitable depends on the durability of the insulator, the amount of insulator to be installed, but also on the weight of the generator itself. So there are molded rubber insulators, glued rubber, spring insulators, or airbags.

Vibration Mount Size Catalog

Compare five mounting arrangements using the matching drawing, thread and dimensional data. Load and compression columns retain their stated units; confirm operating conditions for your installation.

Type AType BType CType DType E

Vibration Damping Mounts A

Match D, H and thread d to the drawing, including stud length L. Dimensions are in mm; thread designations, load in kg and compression in mm follow the table headings. Confirm load direction and operating conditions for your installation.

Dimension guide

Product appearance

Part NO.	D	H	d	L	Max Load Weight (kg)	Maximum Compression(mm)
VMA1001	8	8	M3	6	8	1.5
VMA1002	8	8	M3	10	8	1.5
VMA1003	10	8	M3	6	10	1.5
VMA1004	10	8	M4	6	10	1.5
VMA1005	10	8	M3	10	10	1.5
VMA1006	10	8	M4	10	10	1.5
VMA1007	10	10	M4	6	10	2
VMA1008	10	10	M4	10	10	2
VMA1009	10	15	M3	6	10	2
VMA1010	10	15	M4	6	10	2
VMA1011	10	15	M4	10	10	2
VMA1012	15	8	M4	10	18	2
VMA1013	15	8	M5	10	18	2
VMA1014	15	8	M4	12	18	2
VMA1015	15	8	M5	12	18	2

Need a different size? Share your drawing, mating dimensions and intended use to discuss a suitable part.

Discuss Your Requirements