Hi temp silicone tubing
Hi temp silicone tubing solutions are made of silicone rubber and alkali-free glass fiber. They are filtered through various procedures and retain decent self-extinguishing properties. In addition to that, the silicone tubing products are resistant to heat and temperature. These solutions are suitable for the safety of pipe channels in several industrial high-temperature settings.
The dimensional examples below retain the values given in this article for hi temp silicone tubing. Read ID as inside diameter and OD as outside diameter; all listed measurements are in millimetres.
- Size 1: ID 1.0, OD 1.6; wall 0.3; stated tolerance 0.05.
- Size 2.5 has a 2.5 bore within a 3.5 outside diameter, with a 0.5 wall and 0.1 tolerance.
- For size 5, the bore is 5.0 and the outside diameter is 6.0. The listed wall and tolerance are 0.5 and 0.1 respectively.
- Size 8 is listed as 8.0 inside and 9.0 outside; wall thickness 0.5, tolerance 0.1.
- The size 10 example uses a 10.0 ID with 12.0 OD. Its wall is 1.0 and its stated tolerance is 0.2.
- Size 15: a 15.0 bore, 17.0 exterior diameter, 1.0 wall and 0.2 tolerance.
These are dimensional references from the existing article. The applicable drawing should define which features a tolerance controls; the size examples do not establish a temperature or pressure rating.
We manufacture hi temp tubing solutions made of better quality, sturdy, reliable and long-lasting silicone materials only. The reason we are popular among clients from various countries is because of our customization options. We produce high-quality silicone tube products at a reasonable price which you can never have by other manufacturers. In case if you have any dilemmas related to the hi temp silicone tubing solutions, we advise you to get in touch with our experts. They will answer each and every query of yours.
Silicone Tubing Size Catalog
Compare inside diameter, outside diameter and listed wall thickness across silicone tube ranges. Confirm the material grade and application requirements for the selected part.
Food grade silicone tube
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Black silicone tubing
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Industrial silicone tube
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Colourful silicone braided tube
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Food grade silicone braided tube
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Need a different size? Share your drawing, mating dimensions and intended use to discuss a suitable part.
Discuss Your RequirementsProduct specifications
- Product form
- Hollow elastomer tubing for a fitted line or sleeve
- Material
- Silicone. Specify the compound grade for the selected service.
- Application focus
- Industrial fluid lines. Size the part against the selected assembly.
- Dimensions to confirm
- Inside diameter, outside diameter, wall thickness and cut length. Match these to industrial fluid lines.
- Thermal duty
- Define continuous exposure, short peaks and cycle time; establish the usable limit for the selected compound and assembly.
- Contact conditions
- Alkalis: define concentration, temperature and contact time, then check compatibility with the chosen compound.
- Line layout
- Check bend radius, unsupported spans and clearance at both connections.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]