Laboratory rubber tubing
We manufacture laboratory rubber tubing for the transfer of liquids and gasses from one glassware to another. Their use, as the name suggests, is mostly for the medical industry, predominantly for experiments. The medical industry needs rubber tubing to make sure testings and experiments go as intended. The reason why rubber is an excellent choice is down to the fact that it is water-resistant and chemical resistant.
But even so, our laboratory rubber tubing can be used for a wide range of applications. You’ll mostly find rubber tubing in the form of hoses. This is used to transfer the before-mentioned liquids and gasses. But rubber tubing can also come in the form of rubber stoppers. Rubber stoppers are small objects that we specifically design to fit the entrance of glassware. They are used to stop liquids and gasses from escaping. They’re seal-proof, will not come off, and come in a wide range of rubber materials. We manufacture our laboratory rubber tubing from a selection of materials including silicone, EPDM, FKM, Neoprene, and more.
These materials are excellent for keeping glassware free of contamination. They’re not a short-term solution as our laboratory rubber tubing can last for years. Due to the unique properties of the rubber material, the tubing is very strong and very elastic. You can twist the hose without fear of snapping in half. In addition, we make our rubber tubing from the highest possible quality of rubber that is very durable. In addition to the anti-liquid properties that we mentioned earlier, there is no better way to transfer liquids and gasses or stop liquids and gasses from escaping than using our laboratory rubber tubing.
We make the tubing in all sizes. All you need to do is navigate to our size chart to figure out what size works best for your needs.
Rubber Hose Size Catalog
Compare tube bore, outside diameter and available wall thickness. Confirm material compatibility and operating requirements for the selected hose.
Rubber Hose
Compare Inside Diameter and Outside Diameter in mm. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Fluororubber Hose
Compare Inside Diameter and Outside Diameter in mm. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Colourful rubber high pressure hose
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Need a different size? Share your drawing, mating dimensions and intended use to discuss a suitable part.
Discuss Your RequirementsProduct specifications
- Product form
- Hollow elastomer tubing for a fitted line or sleeve
- Material options discussed
- Silicone, EPDM, chloroprene rubber (CR) and FKM. Choose one formulation for the actual contact and loading conditions.
- Application focus
- Laboratory connections and medical-device assemblies. Size the part against the selected assembly.
- Dimensions to confirm
- Inside diameter, outside diameter, wall thickness and cut length. Match these to laboratory connections and medical-device assemblies.
- Contact conditions
- Water: define concentration, temperature and contact time, then check compatibility with the chosen compound.
- Line layout
- Check bend radius, unsupported spans and clearance at both connections.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]