Non latex rubber tubing
The non latex rubber tubing solutions are ideal to be utilized with all your laboratory burners. We produce only the highly flexible and durable rubber tubes. In addition to that, the non latex rubber tubes are impassable to gas, which makes them ideal for several applications. These rubber tubes have the potential to tolerate temperatures between -20 degrees Fahrenheit and 212 degrees Fahrenheit. The rubber tubes are reinforced with fibers or banding for enhanced strength. Our non latex rubber tubing products have the power to become sterilized for sterile projects and applications. Some of our products are the best choice for electrical applications and they feature great spark resistance.
We manufacture non latex rubber tubes in a wide range of outer finishes. The solid rubber tubes are dark and finalized with one solid color. As for the clear rubber tubing, they are totally see-through. Due to that, they are crucial for applications related to handling fluids in which the liquid flow must be regulated. The translucent rubber tubes enable some light passage so fluid flow is partially noticeable and can be controlled. Lastly, we also produce multi-colored tubes, which have an outer finish made with more than a single color.
Accurate sizing of rubber tubes is crucial for matching to the necessities of various applications. In general, the standard sizes for rubber tubing are established on the outer diameter, which assesses across the entire cross category of the duct. The wall thickness and internal diameter of the rubber tubing can be utilized to assume the density of the tube wall and the liquid flow region. Because of the customization options, it became possible to obtain personalized rubber tubes. For any inquiry into the non latex rubber tubes, we advise you to reach out to our technical team.
Rubber Hose Size Catalog
Compare tube bore, outside diameter and available wall thickness. Confirm material compatibility and operating requirements for the selected hose.
Rubber Hose
Compare Inside Diameter and Outside Diameter in mm. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Fluororubber Hose
Compare Inside Diameter and Outside Diameter in mm. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Colourful rubber high pressure hose
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Need a different size? Share your drawing, mating dimensions and intended use to discuss a suitable part.
Discuss Your RequirementsProduct specifications
- Product form
- Hollow elastomer tubing for a fitted line or sleeve
- Material declaration
- Require a formulation without natural rubber latex and obtain the declaration for the selected part.
- Application focus
- Laboratory connections. Size the part against the selected assembly.
- Dimensions to confirm
- Inside diameter, outside diameter, wall thickness and cut length. Match these to laboratory connections.
- Contact conditions
- Other gases: define concentration, temperature and contact time, then check compatibility with the chosen compound.
- Cleaning and reuse
- Specify the cleaning or sterilization cycle discussed for the application, including temperature, duration and permitted reuse.
- Line layout
- Check bend radius, unsupported spans and clearance at both connections.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]