Rubber pressure washer
Rubber pressure washer are very popular accessories, made of narrow and very flexible rubber. These rubber washers are also called I/O-ring. So, they are of circular cross-section and unlike classic rubber washers, the cavity inside the circle is much larger. They are very flexible and pliable. They are produced in different diameters and different hardness, depending on the purpose.
The main purpose of rubber pressure washer is gasket hoses, pipes and similar products. They are extremely flexible and enable both rotational and linear movement. It ensures with certainty that no fluid will leak under any circumstances. This rubber pressure washer is ideal for pumps, hoses and rods that work under pressure.
Every part on these appliances will fit perfectly with this rubber washer. Pressure washers simply cannot function without these washers. They ensure that water can neither enter nor leave the appliance. They stick all the parts so tightly together that the machine simply becomes compact. If there is a water leak in some parts, the maximum water pressure is immediately lost. The work will not be done well, and the costs of wasting water and time will increase. In addition to water, they are ideal for machines that work under pressure transporting crude oil, gasoline, propane and various oils. These erasers are used in engines, gearboxes, and are simply available everywhere: from the shower cabin to the aircraft pump.
Although they look weak, this rubber is made of high-quality rubber and is very resistant. It tolerates UV radiation well and is compatible with various chemicals and cleaning agents. It withstands temperature differences very well, even up to 400F. It is resistant to wear and tear. If changed on time, the longevity and maximum function of the appliance are undeniable. They produce different volumes and hardness. Most often, on the market, you can buy packed in packs of 10 to 20 rubber pressure washer.
O-Ring Size Catalog
Compare inner diameter, outer diameter and cross-section diameter. Check the groove and material requirements for the selected O-ring.
O-Ring
Dimensions are in mm. Wire Diameter is the O-ring cross-section diameter; compare it with the inner and outer diameters in the selected row.
Need a different size? Share your drawing, mating dimensions and intended use to discuss a suitable part.
Discuss Your RequirementsProduct specifications
- Product form
- Circular-section O-ring for a pressure-washer or hose connection.
- Ring size
- Specify inside diameter and cross-section from the original seal or mating groove.
- Groove interface
- Measure the sealing groove, assembled squeeze and clearance at the joint.
- Operating medium
- Define water temperature, cleaning additives and any alternative fluid before choosing the elastomer.
- Pressure and movement
- Specify working pressure, pressure cycling and whether the joint is static or moves during operation.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]