Rubber tubing is used to route fluids or gases and to connect components. Selecting a suitable tube starts with the application: the medium, operating conditions, fitting design and space available for installation.
Check the dimensions
Specify the inside diameter, outside diameter or wall thickness and cut length. Check the mating fitting and the space needed for routing. A tube with the correct bore can still be unsuitable if its wall thickness, bend behavior or connection fit does not meet the installation requirements.
Choose the compound for the service
Rubber tubing can be made from natural rubber or a synthetic elastomer. Resistance to chemicals, abrasion, heat and weathering varies by compound and formulation. Do not assume that every rubber tube has the same resistance or that a general material description establishes a pressure rating.
Stock and custom tubing
For a quote, provide dimensions, quantity, the medium in contact with the tube, working pressure or vacuum and operating temperature. State any documentation or testing required for your application. ETOL can review these requirements against the available tubing and custom options.
Explore rubber and silicone tubing or request a quote.
Rubber Hose Size Catalog
Compare tube bore, outside diameter and available wall thickness. Confirm material compatibility and operating requirements for the selected hose.
Rubber Hose
Compare Inside Diameter and Outside Diameter in mm. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Fluororubber Hose
Compare Inside Diameter and Outside Diameter in mm. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Colourful rubber high pressure hose
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Need a different size? Share your drawing, mating dimensions and intended use to discuss a suitable part.
Discuss Your RequirementsProduct specifications
- Product form
- Hollow elastomer tubing for a fitted line or sleeve
- Material options discussed
- Silicone and natural rubber / latex. Choose one formulation for the actual contact and loading conditions.
- Dimensions to confirm
- Inside diameter, outside diameter, wall thickness and cut length.
- Contact conditions
- Other gases: define concentration, temperature and contact time, then check compatibility with the chosen compound.
- Exposure to evaluate
- Rubbing or abrasion. Validate the selected material under the combined conditions.
- Line layout
- Check bend radius, unsupported spans and clearance at both connections.