Silicone elbow tubing
These silicone elbow tubings are built depending on the quality of the material strictly adhering to the quality standard. Unlike plastic, the material from which silicone elbow tubing is made has high physical and chemical performance. It is most often used when connecting pipes at an angle, and where additional problems are compression. Its characteristics are very long-lasting, and even after many years of work, it will not wear out or deteriorate. It is extremely flexible throughout its life. Rubber hoses can wear out, tear or rot over time, this is not the case with silicone hoses. Depending on their purpose, the thickness of these hoses can be increased by the number of layers. Also, the bow can be adapted to the needs of the user, although the 90-degree one is most often used.
Silicone elbow tubing is designed so that they can very easily connect pipes and various components in systems where it is necessary to use coolants. However, due to the material from which they are made, good care must be taken that these coolants are water-based or ethylene glycol. Therefore, they must never be used for oil-based or fuel-based liquids. They are very resistant to ozone and various weather conditions. They ideally operate at temperatures from -60 degrees, up to 200 degrees C. due to their performance, they are very used in various industries, including food, pharmaceutical, automotive and many other industries. There is almost no car or truck that does not have silicone elbow tubing.
These pipes are your safe solution when connecting two pipes at an angle. If necessary, you can shorten them by cutting. Installation is quite simple as is their clamping. Clamping ensures absolute safety in their use. Since they are made of quality silicone, the maintenance of these pipes is more than simple.
Product specifications
- Product form
- Formed elbow tube
- Material
- Silicone. Specify the compound grade for the selected service.
- Application focus
- Food-processing equipment, pharmaceutical fluid handling and vehicle hose runs. Size the part against the selected assembly.
- Dimensions to confirm
- Inside diameter, outside diameter, wall thickness and cut length.
- Formed routing
- Dimension bend angle, centerline radius, leg lengths and orientation of the two ends.
- Contact conditions
- Water, lubricating oil, fuel and food ingredients: define concentration, temperature and contact time, then check compatibility with the chosen compound.
- Exposure to evaluate
- Ozone, outdoor weather and oil splash. Validate the selected material under the combined conditions.
- Line layout
- Check bend radius, unsupported spans and clearance at both connections.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]