Small rubber bushing
Vibration can be a problem in many situations, and industries and it has to be taken care about that problem. It is basically a series of small movements that are spread across the whole machine, device, and other surrounding objects. Because of those small movements, the parts can hit each other multiple times and that can cause damage like broken surrounding objects, and even damage on the machine that produces those vibrations. Other than the damage, it is harmful to the health of the person that is using that machine, and it also produces noise that can cause harm to our ears, and that can reduce our productivity.
To prevent this from happening, people have come up with an idea to put rubber between the part that is causing those movements and the connection with the base or with other objects around to act as a suppressor. Those rubber parts are called rubber bushings and they can vary in size coming from large to really small ones to be suitable for every situation that may come across. The small rubber bushings look like rings or cylinders based on the thickness, and they have rubber placed between two metal walls like a sandwich. That way, the rubber can absorb all small movements, without deforming because the metals around it are basically a mold so it retains the rigidity afterward.
They should be bought after learning what size do you need beforehand, whether you understand that with measuring, or you look online for that situation or the part that you are trying to isolate. You should really be careful not to buy a part that will not fit properly because it will not get the job done. When you have found the exact small rubber bushings, make sure that you install them properly, or if you don’t know how, go to a professional so you don’t have to worry about that.
Product specifications
- Product form
- Elastomer bushing between a shaft or sleeve and its housing
- Dimensions to confirm
- Bore, outside diameter, length and any inner or outer sleeve.
- Isolation objectives
- Steady vibration and structure-borne noise. Define a measurable acceptance target on the supported assembly.
- Installed movement
- Specify radial and axial load, angular movement and the intended clamping arrangement.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]