Soft flexible silicone tubing
Silicone tubing is made of high-quality raw rubber which is pressed until a fine flexible silicone is obtained. The application of soft flexible silicone tubing is very common in many modern industries. They are used daily and can be adapted to any purpose. These pipes, in addition to being high quality, do not pollute the environment. Each pipe of this type is tested according to strict standards SGS, RoH, PHA. It is completely non-toxic. soft flexible silicone tubing has no smell or taste, and very often no color to monitor the movement of the contents. However, according to certain requirements, they can be made in appropriate colors.
Small soft flexible silicone tubing, soft flexible silicone tubing of medium or higher per mille can be found on the market, all depending on the use-value. Due to its flexible properties, you can be sure that it will not crack where it is bent. You can use this soft flexible silicone tubing over and over again and be sure that it will not wear out or wear out, as is the case with ordinary rubber hoses.
Therefore, they are soft, resistant to bending and there is no possibility of corrosion. They work under high pressure and the operating temperature of these pipes ranges from -60C to 200C. they are resistant to ozone, UV radiation, radiation. Their interior is very smooth so there is no possibility of clogging or weakening the flow due to the accumulation of particles. You will be shocked, and at the same time amazed at how many different professions this helpful tool can be used in. We’ll mention here just some of them. They are used in transport, shipbuilding, telecommunications, instrumentation, aerospace, are found in most kitchen appliances, beauty salons, medical and pharmaceutical industries, and many other areas.
Silicone Tubing Size Catalog
Compare inside diameter, outside diameter and listed wall thickness across silicone tube ranges. Confirm the material grade and application requirements for the selected part.
Food grade silicone tube
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Black silicone tubing
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Industrial silicone tube
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Colourful silicone braided tube
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Food grade silicone braided tube
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Need a different size? Share your drawing, mating dimensions and intended use to discuss a suitable part.
Discuss Your RequirementsProduct specifications
- Product form
- Hollow elastomer tubing for a fitted line or sleeve
- Material
- Silicone. Specify the compound grade for the selected service.
- Application focus
- Aircraft equipment, household appliance connections, medical-device assemblies and pharmaceutical fluid handling. Size the part against the selected assembly.
- Dimensions to confirm
- Inside diameter, outside diameter, wall thickness and cut length.
- Compliance
- Specify hardness and its tolerance together with the required deflection of the finished part.
- Exposure to evaluate
- Sunlight or UV and ozone. Validate the selected material under the combined conditions.
- Line layout
- Check bend radius, unsupported spans and clearance at both connections.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]