Thin wall latex tubing
Thin wall latex tubing has gone through a regular production process so that it can be applied in many industries. The whole process begins with rubber strips from which the final product is created. However, it takes a few steps before the job is done. First of all, it is important to determine the thickness of the sheets. After that, a certain color is chosen depending on the end use. This is followed by milling to make an even texture and then cutting. After the rubber becomes flexible enough, it is forwarded to the cutting machine. Thus, a certain thickness is obtained, and then the reinforcement layer follows. This procedure is necessary in order to strengthen the tubing.
When it is sufficiently strengthened, a final layer can be added, which is also the outer shell. Then it is necessary to squeeze all the materials together and start the vulcanization process, and when it is finished, the tubing is cut to the desired lengths. This material belongs to the group of natural materials, and was obtained from rubber trees. The main characteristics of this material are durability and flexibility which makes it usable in different types of environments. This applies, among other things, to the environment in which electricity is transmitted.
Thin wall latex tubing is in charge of preventing situations such as static electromagnetic interference or frequency interference. We must not forget their role in preventing sparks. Since it can easily attract dust, this tubing automatically reduces friction, which is why it is used for preventive purposes. Thus, thin wall latex tubing does not conduct electricity but redirects it near electrically charger equipment.
In case you need thin wall latex tubing with some special features, such as a certain wall thickness, especially if it is below 0.1 mm or a certain color, you can order a custom product.
Rubber Hose Size Catalog
Compare tube bore, outside diameter and available wall thickness. Confirm material compatibility and operating requirements for the selected hose.
Rubber Hose
Compare Inside Diameter and Outside Diameter in mm. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Fluororubber Hose
Compare Inside Diameter and Outside Diameter in mm. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Colourful rubber high pressure hose
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Need a different size? Share your drawing, mating dimensions and intended use to discuss a suitable part.
Discuss Your RequirementsProduct specifications
- Product form
- Hollow elastomer tubing for a fitted line or sleeve
- Material
- Natural rubber / latex. Specify the compound grade for the selected service.
- Dimensions to confirm
- Inside diameter, outside diameter, wall thickness and cut length.
- Wall control
- Dimension wall thickness separately from the bore; check the required bending behavior and connection fit at that thickness.
- Exposure to evaluate
- Dust or debris. Validate the selected material under the combined conditions.
- Line layout
- Check bend radius, unsupported spans and clearance at both connections.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]