Heat Resistant Rubber Tubing
Heat resistant rubber tubing should be selected for the temperature at the tube wall and the medium passing through it. Silicone is one material option, but compound, reinforcement and wall construction affect the finished tube’s working limits. Pressure and heat must be considered together.
For coolant, heater or air-line connections, identify the fluid, fittings and expected movement. When comparing the 6 mm to 19 mm sizes discussed for this type of tubing, establish whether the measurement is the inside or outside diameter and specify the wall separately. A size label alone does not define pressure capacity.
Outdoor service can add sunlight and ozone exposure, while a machine installation may add abrasion or nearby hot surfaces. Check those conditions for the selected compound and provide suitable routing and support. Inspect the tube and connections for deterioration during maintenance; heat resistance does not imply unlimited life or freedom from production interruptions.
Rubber Hose Size Catalog
Compare tube bore, outside diameter and available wall thickness. Confirm material compatibility and operating requirements for the selected hose.
Rubber Hose
Compare Inside Diameter and Outside Diameter in mm. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Fluororubber Hose
Compare Inside Diameter and Outside Diameter in mm. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Colourful rubber high pressure hose
Compare Inside Diameter and Outside Diameter in mm, together with the listed Thickness and Colour. The cross-section drawing identifies the bore and outside diameter; confirm the selected tube material and service requirements.
Need a different size? Share your drawing, mating dimensions and intended use to discuss a suitable part.
Discuss Your RequirementsProduct specifications
- Product form
- Heat-resistant rubber or silicone tubing for a specified line.
- Temperature definition
- Specify tube-wall and fluid temperatures together with operating pressure.
- Size interpretation
- For the discussed 6 mm to 19 mm sizes, identify the measured diameter and define wall thickness.
- Exposure
- Assess coolant or air service, sunlight, ozone, abrasion and nearby heat as applicable.
- Installation checks
- Review fittings, movement, support and deterioration during maintenance.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]