Rubber adhesive feet
Installing the rubber feet properly on your appliances and devices is a must. These accessories help prevent damages and safeguard the equipment by absorbing the shock and vibrations, and they also have anti-slip properties. The worst thing that can happen is you purchasing your protective accessories and them falling off after just a few days. More often than not, these units are really easy to install, but you need to be aware of how to do that. The rubber adhesive feet are the solution for all the problems, and you don’t have to worry about how to mount them and how to place them properly on your equipment.
As the name suggests, the rubber adhesive feet use adhesive to stick to your devices, and you don’t have to drill any holes or use additional glue to put them on your appliances. They are extremely easy to use, and you are the one who chooses how many you want to put on, where to place them, and you can also remove them with ease if you want to replace them. Note that just because they use adhesive it does not mean that they are going to be any less durable than other types of rubber feet that are installed in various ways.
The rubber adhesive feet have the same physical properties as other units, and they can be put on devices that are stored in specific conditions and will not get damaged or peel off the appliances. They are the best way to protect your equipment from any damage, and they will also reduce the noise that comes off of the appliances. As manufacturers, we can help you pick the right type of rubber adhesive feet and we can give you additional guidelines on how to properly install them, how to maintain them, and ultimately, how to remove them when you need to replace them.
Adhesive Rubber Feet Size Catalog
Compare adhesive foot profiles, footprint dimensions and height. Confirm the surface, adhesive and material requirements for your application.
Hemispherical Self Adhesive Rubber Feet
Compare OD and H in mm using this profile drawing. Confirm the required material, colour and adhesive.
Columniform Self Adhesive Rubber Feet
Compare OD and H in mm using this profile drawing. Confirm the required material, colour and adhesive.
Rectangular Self Adhesive Rubber Feet
Compare A, B and H in mm using this profile drawing. Confirm the required material, colour and adhesive.
Trapezoidal Self Adhesive Rubber Feet
Compare A, B and H in mm using this profile drawing. Confirm the required material, colour and adhesive.
Oval Self Adhesive Rubber Feet
Compare A, B and H in mm using this profile drawing. Confirm the required material, colour and adhesive.
Need a different size? Share your drawing, mating dimensions and intended use to discuss a suitable part.
Discuss Your RequirementsProduct specifications
- Product form
- Resilient support foot for an equipment or furniture base
- Application focus
- Household appliances. Size the part against the selected assembly.
- Dimensions to confirm
- Footprint, installed height and attachment position. Match these to household appliances.
- Bond interface
- Identify the substrate and surface finish, adhesive footprint and peel or shear loading at the bond.
- Installation discussed
- Adhesive bonding. Identify the chosen retention method and the surface or hardware it engages.
- Support loading
- Determine the load at each foot and check the resulting compression and stability.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]