Product Details
Columniform Self Adhesive Rubber Feet
Product Specifications
- Material
- EPDM/NR/SBR/Silicone
- Hardness
- 50-60 Shore A
- Temperature Range
- Confirm the rubber compound and adhesive system for the application temperature, substrate and exposure duration.
- Colors
- Black, white. Custom colors can be matched to your Pantone color code.
Self adhesive rubber feet can be customized to your dimensions, shape and material requirements.
Available Sizes
Dimensions are in mm unless otherwise indicated.
| Part No. | OD | H | Material | Color |
|---|---|---|---|---|
| ARF2001 | 4 | 1 | ||
| ARF2002 | 6 | 5.4 | Silicone | White |
| ARF2003 | 8 | 2.2 | Silicone | White |
| ARF2004 | 8 | 2.2 | NR | Black |
| ARF2005 | 8 | 10 | Silicone | Transparent |
| ARF2006 | 8.4 | 3.5 | NR | Black |
| ARF2007 | 8.5 | 7 | NR | Black |
| ARF2008 | 9 | 1.5 | NR | Black |
| ARF2009 | 10 | 3 | NR | Black |
| ARF2010 | 10 | 4 | ||
| ARF2011 | 10 | 10 | NR | Black |
| ARF2012 | 11 | 3 | ||
| ARF2013 | 12 | 2.5 | ||
| ARF2014 | 12 | 4 | ||
| ARF2015 | 12 | 5 | ||
| ARF2016 | 12 | 7.5 | Silicone | White |
| ARF2017 | 12.4 | 4 | ||
| ARF2018 | 12.5 | 6.2 | ||
| ARF2019 | 12.7 | 1.5 | ||
| ARF2020 | 12.7 | 3.5 | ||
| ARF2021 | 12.7 | 10 | Silicone | Transparent |
| ARF2022 | 13 | 2.5 | NR | Black |
| ARF2023 | 13 | 3 | NR | Black |
| ARF2024 | 14 | 5.5 | Silicone | White |
| ARF2025 | 14 | 5.5 | Silicone | Transparent |
| ARF2026 | 14.5 | 5 | NR | Black |
| ARF2027 | 15 | 2 | ||
| ARF2028 | 15 | 3 | NR | Black |
| ARF2029 | 16 | 5 | NR | Black |
| ARF2030 | 16 | 10 | NR | Black |
| ARF2031 | 17 | 5 | ||
| ARF2032 | 17 | 5 | ||
| ARF2033 | 18 | 3 | NR | Black |
| ARF2034 | 18 | 3 | Silicone | Transparent |
| ARF2035 | 18 | 7.5 | Silicone | Transparent |
| ARF2036 | 20 | 2 | ||
| ARF2037 | 20.6 | 3 | NR | Black |
| ARF2038 | 30 | 2 | Silicone | Transparent |
Can’t find your size? Need a custom foot?
Send your dimensions, mounting details and quantity, or attach a drawing. We’ll help you review a custom size, shape or material for your application.
FIT & APPLICATION GUIDE
Use the flat circular face to establish the stand-off
This columniform adhesive foot has straight sides and a flat contact face. Choose the diameter and height together, then plan the support positions under the equipment.
01 / BEFORE YOU CHOOSE
What to measure for this profile
- Circular diameter OD
- Allow a flat bonding area for the complete disk and enough clearance from screws or base edges.
- Column height H
- Check the desired stand-off with the rubber under the intended load, not just its unloaded height.
- Support layout
- Record foot count, positions and the equipment’s weight distribution. Do not assume each foot carries an equal share.
02 / INSTALLATION
Lay out the supports before bonding the disks
Mark the support positions
Place lined feet on the underside layout, keeping access covers and vents clear. Check that the equipment will be stable.
Prepare each bonding area
Use the selected backing’s instructions for the actual substrate and finish; let all areas dry.
Seat each disk flat
Remove liners and apply the prescribed pressure across each circular footprint without tilting the columns.
Set down after the required bond time
Check rocking and uneven compression. Lift the equipment when relocating it if dragging would shear or peel the pads.
03 / USE & CHECK
Where to use this profile
Desktop equipment bases
Evaluate flat-faced circular feet where a defined support pattern is needed under an enclosure.
Circular stand-off pads
Compare loaded height and sideways movement where the cylinder separates two flat surfaces.
For a selection review: OD, H, total weight, support positions, base finish and required loaded stand-off. Send your application details →
Need a different size or shape?
Tell us what you need. We'll help you find the right rubber or silicone part and prepare a quote.