Product Details
Rectangular rubber feet for chairs
Product Specifications
- Material
- PVC. Grade selection depends on the application, including any RoHS, odor or environmental requirements.
- Hardness
- 60 Shore A
- Temperature Range
- -20℃ to70℃.
- Colors
- Black. Custom colors can be matched to your Pantone color code.
Installation
Press the feet onto matching table or chair legs. No adhesive is needed for a correctly sized push fit.
Applications
Fit to table and chair legs to help protect floors, reduce scraping noise and improve grip.
Need custom rubber bumpers? Send us your dimensions, material and application requirements.
Available Sizes
Dimensions are in mm unless otherwise indicated.
| Part No. | A | B | C | Material | Color |
|---|---|---|---|---|---|
| RFF6100 | 15 | 30 | 25 | PVC | Black |
| RFF6101 | 20 | 20 | 25 | PVC | Black |
| RFF6102 | 20 | 40 | 26 | PVC | Black |
| RFF6103 | 25 | 25 | 25 | PVC | Black |
| RFF6104 | 25 | 50 | 25 | PVC | Black |
| RFF6105 | 25 | 35 | 25 | PVC | Black |
| RFF6106 | 30 | 30 | 25 | PVC | Black |
| RFF6107 | 30 | 40 | 26 | PVC | Black |
| RFF6108 | 30 | 50 | 28 | PVC | Black |
| RFF6109 | 38 | 38 | 26 | PVC | Black |
| RFF6110 | 40 | 40 | 28 | PVC | Black |
| RFF6111 | 40 | 60 | 28 | PVC | Black |
| RFF6112 | 50 | 50 | 30 | PVC | Black |
| RFF6113 | 60 | 60 | 30 | PVC | Black |
Can’t find your size? Need a custom foot?
Send your dimensions, mounting details and quantity, or attach a drawing. We’ll help you review a custom size, shape or material for your application.
FIT & APPLICATION GUIDE
Match both sides of the rectangular leg
The rectangular cavity fixes the orientation of this chair foot. Check the leg width, length and corner shape together before selecting a model.
01 / BEFORE YOU CHOOSE
What to measure for this profile
- Two internal sides: A × B
- Compare both opening dimensions with the finished leg. Matching only the longer side can leave the shorter side loose.
- Corner shape
- Check corner radius, welded seams and coatings. A square-looking tube may have rounded corners that seat differently.
- Internal depth C
- Measure the straight length available below any brace or weld. Leave room around the outer rim.
02 / INSTALLATION
Align the corners before pressing on
Orient the opening
Match the long and short sides with the leg before applying force. Do not twist the foot through a quarter-turn while fitted.
Start all four corners
Ease the mouth evenly over the leg, keeping each corner outside the cavity wall.
Press to the seating position
Support the chair and press along the leg. Check that a weld bead has not stopped one side early.
Set the chair on a level surface
Inspect all feet for even seating and rocking. Trial movement on the actual flooring and check for marking.
03 / USE & CHECK
Where to use this profile
Rectangular chair frames
Suitable geometry to evaluate for rectangular tube ends; the rim needs clearance from nearby crossbars.
Table legs with unequal sides
Record the orientation in your assembly drawing so the selected opening is not confused with a square section.
For a selection review: Leg width × length, corner radius, coating, available depth and a photo of the tube end. Send your application details →
Need a different size or shape?
Tell us what you need. We'll help you find the right rubber or silicone part and prepare a quote.