Product Details
Recess Rubber Feet
Product Specifications
- Material
- EPDM/NR/SBR/CR/NBR/Silicone，etc.
Specify any requirements for recycled content, odor or RoHS compliance so we can confirm a suitable compound and supporting documentation. - Hardness
- 25-90 Shore A
- Temperature Range
- Confirm the selected compound, service temperature, exposure duration and operating medium before ordering.
- Colors
- Black, white. Custom colors can be matched to your Pantone color code.
Recess Rubber Feet can include metal inserts. Send your drawing and requirements to discuss a custom part.
Available Sizes
Dimensions are in mm unless otherwise indicated.
| Part No. | OD | H | A | B | C | Material | Color |
|---|---|---|---|---|---|---|---|
| RBB2100 | 12.7 | 6.35 | 3.1 | 6.35 | 4 | EPDM/NR/Silicone | Black/White/Gray |
| RBB2101 | 12.7 | 9.53 | 3.97 | 7.94 | 4 | EPDM/NR/Silicone | Black/White/Gray |
| RBB2102 | 15 | 4 | 3 | 6 | 2 | EPDM/NR/Silicone | Black/White/Gray |
| RBB2103 | 19 | 7.2 | 4.8 | 9.6 | 3.2 | EPDM/NR/Silicone | Black/White/Gray |
| RBB2104 | 19 | 9.5 | 3.17 | 9.5 | 4 | EPDM/NR/Silicone | Black/White/Gray |
| RBB2105 | 24 | 11 | 6 | 12 | 6 | EPDM/NR/Silicone | Black/White/Gray |
| RBB2106 | 26.5 | 13 | 4.7 | 9.5 | 5 | EPDM/NR/Silicone | Black/White/Gray |
| RBB2107 | 26.5 | 21 | 4.7 | 9.5 | 11 | EPDM/NR/Silicone | Black/White/Gray |
| RBB2108 | 37 | 15 | 6 | 12 | 8 | EPDM/NR/Silicone | Black/White/Gray |
| RBB2109 | 38 | 38 | 6 | 19 | 9.5 | EPDM/NR/Silicone | Black/White/Gray |
| RBB2110 | 38 | 38 | 6.5 | 19.5 | 9.5 | EPDM/NR/Silicone | Black/White/Gray |
| RBB2111 | 41 | 18 | 8.3 | 9.5 | 6 | EPDM/NR/Silicone | Black/White/Gray |
Can’t find your size? Need a custom foot?
Send your dimensions, mounting details and quantity, or attach a drawing. We’ll help you review a custom size, shape or material for your application.
FIT & APPLICATION GUIDE
Keep the screw head inside the cylindrical recess
This straight-sided recessed foot provides a pocket around the fixing head. The useful clearance depends on both the selected hardware and the rubber height under load.
01 / BEFORE YOU CHOOSE
What to measure for this profile
- OD and H
- Check the available mounting area and the required foot height. Leave space for lateral expansion under compression.
- A and B
- A describes the small fixing passage; B describes the wider recess. Check the shank, head and any approved washer separately.
- Recess depth C
- Compare with the installed head stack. Preserve clearance between metal and the supporting surface.
02 / INSTALLATION
Fasten from the recessed face
Prepare the fixing point
Check the equipment base and thread or nut arrangement. Remove burrs around the mounting hole.
Orient the recess outward
Place the flat mounting face against the equipment so the wider opening remains accessible from below.
Install the specified hardware
Seat the head within the recess. Use an insert or washer only where specified for the chosen part.
Load and inspect
Check that the rubber contact ring supports the assembly while the head remains clear of the surface. Inspect for rocking and loosening.
03 / USE & CHECK
Where to use this profile
Flat enclosure bases
Review a recessed foot where a straight cylindrical outline suits the available space.
Replaceable equipment feet
Leave access to the recess so the fixing can be checked or removed during servicing.
For a selection review: OD, H, passage and recess sizes, head stack height, equipment weight and foot layout. Send your application details →
Need a different size or shape?
Tell us what you need. We'll help you find the right rubber or silicone part and prepare a quote.