Product Details
Rectangular Self Adhesive Rubber Feet
Product Specifications
- Material
- EPDM/NR/SBR/Silicone
- Hardness
- 20-80 Shore A
- Temperature Range
- Confirm the rubber compound and adhesive system for the application temperature, substrate and exposure duration.
- Colors
- Black, white. Custom colors can be matched to your Pantone color code.
Self adhesive rubber feet can be customized to your dimensions, shape and material requirements.
Available Sizes
Dimensions are in mm unless otherwise indicated.
| Part No. | A | B | H | Material | Color |
|---|---|---|---|---|---|
| ARF5001 | 8 | 8 | 1.5 | EPDM/NR/SBR/Silicone | Black/White/Transparent/Others |
| ARF5002 | 10 | 5 | 7.5 | EPDM/NR/SBR/Silicone | Black/White/Transparent/Others |
| ARF5003 | 10 | 10 | 4 | EPDM/NR/SBR/Silicone | Black/White/Transparent/Others |
| ARF5004 | 10 | 10 | 7.5 | EPDM/NR/SBR/Silicone | Black/White/Transparent/Others |
| ARF5005 | 12.7 | 12.7 | 6 | EPDM/NR/SBR/Silicone | Black/White/Transparent/Others |
| ARF5006 | 12.7 | 12.7 | 3 | EPDM/NR/SBR/Silicone | Black/White/Transparent/Others |
| ARF5007 | 13 | 4 | 4 | EPDM/NR/SBR/Silicone | Black/White/Transparent/Others |
| ARF5008 | 15 | 15 | 5 | EPDM/NR/SBR/Silicone | Black/White/Transparent/Others |
| ARF5009 | 19.7 | 6 | 4 | EPDM/NR/SBR/Silicone | Black/White/Transparent/Others |
| ARF5010 | 20 | 20 | 8 | EPDM/NR/SBR/Silicone | Black/White/Transparent/Others |
| ARF5011 | 25 | 25 | 4 | EPDM/NR/SBR/Silicone | Black/White/Transparent/Others |
Can’t find your size? Need a custom foot?
Send your dimensions, mounting details and quantity, or attach a drawing. We’ll help you review a custom size, shape or material for your application.
FIT & APPLICATION GUIDE
Place the rectangular footprint fully on the base
A rectangular adhesive foot needs a flat bonding area under its entire footprint, including all four corners. Plan its orientation before removing the liner.
01 / BEFORE YOU CHOOSE
What to measure for this profile
- Footprint A × B
- Check both plan dimensions against the flat mounting area. Keep corners clear of rounded housing edges, seams and screw pockets.
- Height H
- Check the stand-off and the space to surrounding parts. Allow for the actual compression under service load.
- Surface and backing
- Identify the substrate, coating and adhesive grade. The rubber compound does not establish backing compatibility.
02 / INSTALLATION
Align the edges, then press the full rectangle
Mark the footprint
Dry-position the foot with the liner on. Align its long edge with the housing and check all four corners are supported.
Prepare the flat area
Use the backing supplier’s surface preparation method and let the surface dry. Keep it free of dust and residue.
Remove the liner and place once
Avoid touching the adhesive. Apply the specified pressure across the full rectangle, including the corners.
Allow the specified bond time
Follow the backing instructions before loading. Inspect the corners for lifting after trial use.
03 / USE & CHECK
Where to use this profile
Flat rectangular housings
Use the available underside area to plan a balanced pad layout clear of vents and access panels.
Broad contact pads
Evaluate the actual contact pressure and surface marking where the rectangular face meets another component.
For a selection review: A × B × H, substrate and finish, available flat area, equipment weight and pad positions. Send your application details →
Need a different size or shape?
Tell us what you need. We'll help you find the right rubber or silicone part and prepare a quote.