Bushings & Grommets – Rubber Parts Manufacutre

Rubber grommet stopper

Thu, 09 Dec 2021 07:28:17 +0000

Professional Silicone Rubber Parts Manufacturers

PRODUCT CATALOG

[contact-form-7]

Rubber grommet stopper

When equipping your new laboratory, or just renewing your old one, you have to make sure that you have everything you will ever need. Nobody forgets about the glassware, the metal stands, and the measuring units. However, when it comes to smaller objects, you have to make sure that you have got them as well. Having to use circular systems of glass objects connected whether for distillation purposes or something else, it cannot be done without the rubber grommet stopper. There is no point in compromising the results of the examinations you perform because of the lack of small equipment like the rubber grommets.

The rubber grommet stopper comes in three variants. The first one is completely closed, and it is used to seal the glass-made objects. The second variant is the grommet with one hole that lets you precisely measure certain parameters during the experiment. That way, you will have a better-controlled examination, knowing the right temperature and pH on every time interval that is important for you. The third variant is the one with two holes, and it is supposed to have one medium come inside from the first hole, and the second medium to go out through the second hole. That way, there is a complete circle.

Because these grommets are completely made out of rubber, we can achieve the sealing effects. We can produce grommets from various types of rubber so they can suit your situation better. However, to let the grommets be effective, you will have to get the right-sized ones. Before you order, make sure that you measure the necks of any equipment that you might want to seal later on. After that, find the size on our list, and you should be good to go. In case you are not able to find the correct size, we can manufacture a special-sized rubber grommet stopper for you.

Our Butyl Stoppers Size Chart

Material: It is produced with bromobutyl rubber raw material and has good sealing performance. For anaerobic reaction seals, anaerobic culture tubes, anaerobic culture flasks
Hardness: 30-90 Shore A
Temperature Rang: -50℃ to 150℃
Colors: Black, blue. Custom colors available to your Pantone color code.
Custom service available, we can offer special Butyle plugs according to your requirements.

PartNo.	A	B	C	D	E
RSIIR14.5-19.7-11	14.5	19.7	11	3	0
RSIIR2.5-5.5-5.3	2.5	5.5	5.3	2	0
RSIIR3-4.3-4.5	3	4.3	4.5	0.8	0
RSIIR3-7-7	3	7	7	2.2	0
RSIIR3.5-6.5-6	3.5	6.5	6	2	0
RSIIR3.8-7-10.5	3.8	7	10.5	1.5	0
RSIIR3.8-7-7	3.8	7	7	1.5	0
RSIIR4-7.5-6	4	7.5	6	2	0
RSIIR4.5-7.5-6	4.5	7.5	6	2	0
RSIIR4.8-6.8-3.6	4.8	6.8	3.6	0.9	0
RSIIR5-8-7-2	5	8	7	1.5	2
RSIIR5-8-7-3	5	8	7	1.5	3
RSIIR5-10-8	5	10	8	2.8	0
RSIIR5.7-11.7-12	5.7	11.7	12	6.5	0
RSIIR6-8-5	6	8	5	2.2	0
RSIIR6.2-8.2-9.6	6.2	8.2	9.6	3.9	3.8
RSIIR6.5-8-4	6.5	8	4	2	0
RSIIR6.5-9.5-7	6.5	9.5	7	2	0
RSIIR6.8-8-4	6.8	8	4	1	0
RSIIR7-10-8	7	10	8	1.5	4
RSIIR8-11-8	8	11	8	1.5	4.5
RSIIR8-11-7	8	11	7	2.5	0
RSIIR8.5-12-8	8.5	12	8	2	5
RSIIR8.5-10-6	8.5	10	6	2	0
RSIIR8.6-11-3.3	8.6	11	3.3	2.2	0
RSIIR8.8-11-15	8.8	11	15	3.2	0
RSIIR9-13-8	9	13	8	2	5.5
RSIIR9-13-9	9	13	9	2	5
RSIIR10-14-9	10	14	9	2	6
RSIIR10-12-10	10	12	10	2	0
RSIIR10-15-11	10	15	11	1	0
RSIIR10.5-12-10	10.5	12	10	1	0
RSIIR10.5-13.2-21	10.5	13.2	21	4	5.7
RSIIR11-15-10	11	15	10	2	7
RSIIR11.2-16.7-11.5	11.2	16.7	11.5	2.5	4.7
RSIIR12-16-10	12	16	10	2	7.5
RSIIR13-17-10	13	17	10	2	8
RSIIR13-19.5-7	13	19.5	7	3.3	0
RSIIR14-18-10	14	18	10	2	9
RSIIR15-23-10	15	23	10	4	6
RSIIR15.3-20-10	15.3	20	10	3	6
RSIIR15.5-20-10	15.5	20	10	3	6
RSIIR16-24-10	16	24	10	4	7
RSIIR17-25-10	17	25	10	4	7
RSIIR17.2-20-7	17.2	20	7	1.2	5.8
RSIIR18-26-10	18	26	10	4	8
RSIIR19-27-10	19	27	10	4	9
RSIIR19.5-25-10	19.5	25	10	3	10
RSIIR19.5-26-10	19.5	26	10	5	16
RSIIR20-27-10	20	27	10	3	15
RSIIR20-28-10	20	28	10	4	10
RSIIR21-29-10	21	29	10	4	11
RSIIR22-29-10	22	29	10	4	12
RSIIR23-33-10	23	33	10	5	13
RSIIR24-31-10	24	31	10	4	14
RSIIR24.5-30-10	24.5	30	10	3	15
RSIIR25-35-10	25	35	10	5	15
RSIIR25.4-32-10	25.4	32	10	3	16
RSIIR26-33-10	26	33	10	3.5	16
RSIIR27-34-10	27	34	10	3.5	17
RSIIR28-35-10	28	35	10	3.5	18
RSIIR29-36-10	29	36	10	3.5	19
RSIIR30-40-12	30	40	12	1.5	20
RSIIR30.3-36-10	30.3	36	10	3.5	20
RSIIR31.3-37-10	31.3	37	10	3.5	21
RSIIR33.3-38-12	33.3	38	12	3.5	22
RSIIR36.3-42-12	36.3	42	12	3.5	25
RSIIR37.6-43.5-12	37.6	43.5	12	3.5	26
RSIIR39.3-45-12	39.3	45	12	3.5	28
RSIIR41.3-48-12	41.3	48	12	3.5	30
RSIIR43.5-49-12	43.5	49	12	3.5	33
RSIIR46.3-52-12	46.3	52	12	3.5	35
RSIIR48.5-54-12	48.5	54	12	3.5	38
RSIIR51.3-57-12	51.3	57	12	3.5	40
RSIIR53.6-60-14	53.6	60	14	3.5	42
RSIIR56.3-62-12	56.3	62	12	3.5	44
RSIIR58.6-65-14	58.6	65	14	3.5	47
RSIIR61.3-67-12	61.3	67	12	3.5	49
RSIIR66.3-72-12	66.3	72	12	3.5	54
RSIIR68.6-75-14	68.6	75	14	3.5	57
RSIIR71.3-77-12	71.3	77	12	3.5	59
RSIIR73.6-80-14	73.6	80	14	3.5	62
RSIIR76.3-82-12	76.3	82	12	3.5	64
RSIIR78.6-85-14	78.6	85	14	3.5	67
RSIIR80-90-12.5	80	90	12.5	5.5	70
RSIIR82.3-87-12	82.3	87	12	5	68
RSIIR86.3-92-12	86.3	92	12	3.5	74
RSIIR91.3-97-14	91.3	97	14	3.5	78
RSIIR96.3-102-14	96.3	102	14	3.5	83
RSIIR101.5-114-15	101.5	114	15	5	85
RSIIR140.5-160-15	140.5	160	15	10	0

Do you need a quote? Or need to place an order?
We also provide customized services, and can make various non-standard silicone rubber parts according to your drawings or samples.
Send your dimensions, material requirements and quantity for a quote.

Email:sales@etolrubber.com

The post Rubber grommet stopper appeared first on Rubber Parts Manufacutre.

Vibration Isolation Bushings

Sat, 04 Sep 2021 02:16:23 +0000

Professional Silicone Rubber Parts Manufacturers

PRODUCT CATALOG

[contact-form-7]

Vibration Isolation Bushings

Vibration isolation bushing is a type of vibration isolator. In most cases, a vibration isolation bushing is made from rubber, which is what makes it great at absorbing and isolating vibrational frequencies. For that reason, they are also known as rubber bushings, so if you hear that name, it usually means the same thing. What this piece of equipment does is act as a bridge between two parts, usually in a vehicle, by dampening the vibrations that are being transmitted through it.

More often than not, you can find these in motor vehicle suspension systems. In this application, a vibration isolation bushing is used to separate the two metal objects while still allowing enough room for every suspension part to move freely. When you are driving a car, and when you go over a large bump or a hole in the road, the suspension is supposed to absorb that impact so that you do not feel it as harshly, and to do that, there needs to be a vibration isolation bushing in the suspension so that it can do what it has to do. If there wasn’t a bushing there, the metal parts wood rapidly deteriorate and break, and you would have a very unpleasant driving experience.

Vibration isolation bushings are most commonly made from natural rubber, but they can also be made from synthetic rubber or polyurethane. These kinds of rubber are not only good at isolating and absorbing vibrations, but they are also very durable and wear and tear-resistant, which is very important. Bushings take on a lot of damage on a daily basis, so it is vital that they are abrasion resistant and that they can take a lot of damage without breaking. Also, because of friction, the temperatures can get really high, so these rubber bushings are also temperature resilient, as well.

Our Products

Rubber Vibration Mounts E

Rubber Mountings D

Vibration Isolators C

Anti-Vibration Rubber Mounts B

Vibration Damping Mounts A

Material: EPDM/NR/SBR/Silicone/FKM/NBR/CR
Hardness: 30-90 Shore A
Temperature Rang: -70℃ to 220℃, we can customize products with a temperature resistance of more than 300℃.
Colors: Black, white. Custom colors available to your Pantone color code.
Custom service available, we can offer special rubber mounts according to your requirements.

Email:sales@etolrubber.com

The post Vibration Isolation Bushings appeared first on Rubber Parts Manufacutre.

Vibration damping bushings

Sat, 04 Sep 2021 02:15:55 +0000

Professional Silicone Rubber Parts Manufacturers

PRODUCT CATALOG

[contact-form-7]

Vibration damping bushings

We all know how difficult the production process is, and we are also aware of how easily our machines can get damaged. Because of that, we need to do anything we can to protect them, increase their life, and make sure their parts are always going to stay in place. One of the number one reasons why devices get damaged is because of the vibrations they produce while working. When the machine is placed on a flat surface, without anything in between the floor and the bottom of the device, the vibrations are even stronger, and the sound from the contact is too loud. If you want to avoid this, and if you want to do something about the shock and constant friction, you should implement vibration damping bushings in your production process.

These units are small, they are flexible, and at the same time, they are extremely strong and able to withstand extreme conditions and pressure. In most of the manufacturing companies, the devices are exposed to extreme heat, sometimes constant moisture, and you may even be working with harsh chemicals. Because of this, the vibration damping bushings are most commonly made of rubber, as this material will not get easily damaged. No matter if you put the machines inside or outdoors, and no matter the weather, they will serve their purpose and absorb the shock and the vibrations.

It is said that when you implement them, the vibration damping bushings will also keep the machines in place, so they won’t start bumping into their surroundings. They prevent friction, but they also prevent any sudden movements and breakage. As manufacturers, we can offer you different models of vibration damping bushings, and we can help you make the best choice depending on your specific needs. Make sure you pay close attention to the size and weight of your devices and remember that opting for the right size is going to be the best way to ensure safety and security in your company.

Our Products

Rubber Vibration Mounts E

Rubber Mountings D

Vibration Isolators C

Anti-Vibration Rubber Mounts B

Vibration Damping Mounts A

Material: EPDM/NR/SBR/Silicone/FKM/NBR/CR
Hardness: 30-90 Shore A
Temperature Rang: -70℃ to 220℃, we can customize products with a temperature resistance of more than 300℃.
Colors: Black, white. Custom colors available to your Pantone color code.
Custom service available, we can offer special rubber mounts according to your requirements.

Email:sales@etolrubber.com

The post Vibration damping bushings appeared first on Rubber Parts Manufacutre.

Threaded rubber bushing

Sat, 04 Sep 2021 02:14:42 +0000

Professional Silicone Rubber Parts Manufacturers

PRODUCT CATALOG

[contact-form-7]

Threaded rubber bushing

When machines use movements to work, they might be causing vibration when they touch surrounding objects, and giving you a weird feeling that might affect your health especially your locomotory system, and because of the noise that is produced, you might have trouble sleeping, and it may reduce your productivity. Other than health problems, there can be financial ones because of the damage that may happen to the objects around from hitting too many times, or to the machine that is producing all these movements so you will have to pay for repairs.

To avoid all these problems, you should use rubber bushings because they serve the purpose of reducing if not completely stop the vibrations that happen. Depending on the machine and the purpose, there are different rubber bushings that can be used. For example, if you need to screw the busing into place, you should use threaded rubber bushings. The threaded rubber bushings are basically similar to the other bushings, with the difference that they have a hole in the middle where they can be screwed on wherever they need to.

They use a special type of rubber that has increased qualities from the regular one so it can absorb more movements and reduce the noise that is happening from that. Before you buy the threaded rubber bushing for the situation that you have, make sure that they can withstand the weight that you will be putting them under so they don’t deform quickly. Other than that, you should understand if that threaded rubber bushing can survive that many movements in a such short interval. To install them, you should have no problem because all you need is to screw them on using the threaded part in the middle, tighten them well and you will see the results quickly.

Our Products

Rubber Vibration Mounts E

Rubber Mountings D

Vibration Isolators C

Anti-Vibration Rubber Mounts B

Vibration Damping Mounts A

Material: EPDM/NR/SBR/Silicone/FKM/NBR/CR
Hardness: 30-90 Shore A
Temperature Rang: -70℃ to 220℃, we can customize products with a temperature resistance of more than 300℃.
Colors: Black, white. Custom colors available to your Pantone color code.
Custom service available, we can offer special rubber mounts according to your requirements.

Email:sales@etolrubber.com

The post Threaded rubber bushing appeared first on Rubber Parts Manufacutre.

Small rubber bushing

Sat, 04 Sep 2021 02:14:31 +0000

Professional Silicone Rubber Parts Manufacturers

PRODUCT CATALOG

[contact-form-7]

Small rubber bushing

Vibration can be a problem in many situations, and industries and it has to be taken care about that problem. It is basically a series of small movements that are spread across the whole machine, device, and other surrounding objects. Because of those small movements, the parts can hit each other multiple times and that can cause damage like broken surrounding objects, and even damage on the machine that produces those vibrations. Other than the damage, it is harmful to the health of the person that is using that machine, and it also produces noise that can cause harm to our ears, and that can reduce our productivity.

To prevent this from happening, people have come up with an idea to put rubber between the part that is causing those movements and the connection with the base or with other objects around to act as a suppressor. Those rubber parts are called rubber bushings and they can vary in size coming from large to really small ones to be suitable for every situation that may come across. The small rubber bushings look like rings or cylinders based on the thickness, and they have rubber placed between two metal walls like a sandwich. That way, the rubber can absorb all small movements, without deforming because the metals around it are basically a mold so it retains the rigidity afterward.

They should be bought after learning what size do you need beforehand, whether you understand that with measuring, or you look online for that situation or the part that you are trying to isolate. You should really be careful not to buy a part that will not fit properly because it will not get the job done. When you have found the exact small rubber bushings, make sure that you install them properly, or if you don’t know how, go to a professional so you don’t have to worry about that.

Our Products

Rubber Vibration Mounts E

Rubber Mountings D

Vibration Isolators C

Anti-Vibration Rubber Mounts B

Vibration Damping Mounts A

Material: EPDM/NR/SBR/Silicone/FKM/NBR/CR
Hardness: 30-90 Shore A
Temperature Rang: -70℃ to 220℃, we can customize products with a temperature resistance of more than 300℃.
Colors: Black, white. Custom colors available to your Pantone color code.
Custom service available, we can offer special rubber mounts according to your requirements.

Email:sales@etolrubber.com

The post Small rubber bushing appeared first on Rubber Parts Manufacutre.

Rubber shock mount bushings

Sat, 04 Sep 2021 02:02:49 +0000

Professional Silicone Rubber Parts Manufacturers

PRODUCT CATALOG

[contact-form-7]

Rubber shock mount bushings

Most manufacturers in the world require some sort of vibration isolator in their products that can handle all the vibrations produced in the environments and by the machine. If not done so, vibrations can severely damage all components and leave them exposed to harm. This is especially relevant for the automobile industry where the parts always tend to be small and precise and are extremely sensitive.

While this problem can be easily resolved with a normal vibration isolator, it is not the most compact or flexible solution out there. Manufacturers need something more, something that can fit like a glove in their vehicles and machines without any difficulty and resist all forms of vibration that gets generated inside. There is one component that is exactly like this and fulfills all the requirements of a manufacturer – our rubber shock mount bushings.

Our rubber shock mount bushings are specially designed to act as buffers and isolators that cut out the energy and vibrations created by the friction between two parts. However, what’s great about these rubber shock mount bushings is that they allow only a limited amount of movement which leads to the product minimizing noise levels as well. Our rubber shock mount bushings come in a number of shapes and forms depending on your preference.

Our rubber shock mount bushings are extensively used in the car manufacturing industry where they are installed in shock rubber mountings, double suspensions, gear stick and combustion engine. Apart from that, they are also used in skateboards.

Our rubber shock mount bushings can be used for a variety of purposes in any manner you want such as shock absorbers, vibration isolators and even abrasion resistors. The quality of our rubber shock mount bushings is unmatched because we are one of the leading rubber product manufacturers in the world.

Our Products

Rubber Vibration Mounts E

Rubber Mountings D

Vibration Isolators C

Anti-Vibration Rubber Mounts B

Vibration Damping Mounts A

Material: EPDM/NR/SBR/Silicone/FKM/NBR/CR
Hardness: 30-90 Shore A
Temperature Rang: -70℃ to 220℃, we can customize products with a temperature resistance of more than 300℃.
Colors: Black, white. Custom colors available to your Pantone color code.
Custom service available, we can offer special rubber mounts according to your requirements.

Email:sales@etolrubber.com

The post Rubber shock mount bushings appeared first on Rubber Parts Manufacutre.

Rubber mounting grommets

Sat, 04 Sep 2021 02:01:41 +0000

Professional Silicone Rubber Parts Manufacturers

PRODUCT CATALOG

[contact-form-7]

Rubber mounting grommets

We offer rubber mounting grommets in various sizes, diameters, and rubber mixtures to suit all of your needs and requirements. These products are incredibly versatile, flexible, and sturdy, as they’re designed to withstand high amounts of pressure, abrasion, and heat. They’re also extremely easy to mount due to their simple yet effective design, making them suitable for both domestic and commercial applications alike.

Even though they’re mostly used to dampen sounds and vibrations generated by large industrial equipment, they can also be used in vehicular, plumbing, electronic, and healthcare applications of various sorts. Again, we offer them in different dimensions and resistance levels to suit every need and requirement out there. Make sure to read our product specs carefully before ordering to ensure you’re getting exactly what you need.

If you cannot find something that suits you in our standard offer, we advise you to reach out and seek a custom-made order. Our experts will be able to design and produce any type of rubber mounting grommets you need.

All of our rubber parts are certain to meet your standards and vibration control requirements, as we only use the best quality rubber in all of our manufacturing processes. These types of grommets are incredibly tear-resistant, which makes them an excellent choice for under-the-hood applications. They can be used as sealants or sound isolators, so they represent a key part of many different manufacturing procedures. Again, ensure you’ve read our product specifications prior to making your first order to ensure our products fit your needs properly. If you’re making a bulk order, you can always ask for samples beforehand to put your mind at ease.

To select a mounting grommet, include the panel opening, sheet thickness and the item being supported through it. A sketch of the fitted position helps explain the desired clearance and the direction of movement. Use these details when comparing the available profiles.

Our Products

Rubber Vibration Mounts E

Rubber Mountings D

Vibration Isolators C

Anti-Vibration Rubber Mounts B

Vibration Damping Mounts A

Material: EPDM/NR/SBR/Silicone/FKM/NBR/CR
Hardness: 30-90 Shore A
Temperature Rang: -70℃ to 220℃, we can customize products with a temperature resistance of more than 300℃.
Colors: Black, white. Custom colors available to your Pantone color code.
Custom service available, we can offer special rubber mounts according to your requirements.

Email:sales@etolrubber.com

The post Rubber mounting grommets appeared first on Rubber Parts Manufacutre.

Rubber mounting bushings

Sat, 04 Sep 2021 02:01:14 +0000

Professional Silicone Rubber Parts Manufacturers

PRODUCT CATALOG

[contact-form-7]

Rubber mounting bushings

Rubber mounting bushings are one of the most common anti-vibration tools found in a variety of automotive applications. They’re popular for their practicality, as they require little to no lubrication and are quite easy to mount and install. We manufacture all of our rubber mounting bushings with flexibility and strength in mind, making them one of the best engine stabilizing and vibration isolation tools we offer.

Besides their obvious role in the automotive industry where they’re used to produce various vehicles, rubber mounting bushings can be used in other types of applications as well. Seeing as they’re made of rubber, these products are extremely versatile and flexible. They can be used as seals, shock absorbers, and abrasion resistors as well. Furthermore, they’re found in transportation solutions to reduce strain and handle large load transfers.

Now, we produce a wide range of rubber mounting bushings in different sizes, diameters, and material mixtures, so we recommend reading the product specs carefully before making your order. That especially goes if you’re planning on making bulk orders and making us your primary supplier. If you cannot find what you’ve been looking for in our standardized offers, we suggest you contact us for a customized order instead. As long as you provide us with detailed requirements, we’ll be able to manufacture exactly what you need.

Again, all of our rubber products are made out of carefully selected materials refined by our modern machinery to ensure the best possible quality in all of our rubber bushings. You can find their specific heat resistance levels in the product specifications, which is especially important as most rubber materials cannot withstand extreme levels of heat. If you have any further questions about our rubber mounting bushings, or you’d like to report an issue with one of our products, feel free to contact us directly for more information.

Our Products

Rubber Vibration Mounts E

Rubber Mountings D

Vibration Isolators C

Anti-Vibration Rubber Mounts B

Vibration Damping Mounts A

Material: EPDM/NR/SBR/Silicone/FKM/NBR/CR
Hardness: 30-90 Shore A
Temperature Rang: -70℃ to 220℃, we can customize products with a temperature resistance of more than 300℃.
Colors: Black, white. Custom colors available to your Pantone color code.
Custom service available, we can offer special rubber mounts according to your requirements.

Email:sales@etolrubber.com

The post Rubber mounting bushings appeared first on Rubber Parts Manufacutre.

Rubber isolator bushings

Sat, 04 Sep 2021 01:46:45 +0000

Professional Silicone Rubber Parts Manufacturers

PRODUCT CATALOG

[contact-form-7]

Rubber isolator bushings

The rubber isolator bushings are small rubber accessories that are made to prevent the transfer of the vibrations that every working engine or machine generates during the production process. These small units usually have great vibration dampening properties, and they also absorb the shock that comes from the devices. The reason why we need them is to protect both the machines and their surroundings. When the shock is not absorbed, then the vibrations are going to affect the inside parts, and they can cause damage to the surroundings.

The inside parts can easily get unmounted and they can start moving around in the device. This will lead to a lot of issues and breakages. Note that the rubber isolator bushings protect the screws and the bolts, along with any other parts made of harsher materials that are rigid. On the same note, if the machine vibrates all the time, and if there are no rubber isolator bushings implemented, then it will first damage the floors, and then all the walls and other items placed around it. In time, it may start slipping or just slowly moving around and bumping into other devices or fixed surfaces. When there is nothing to absorb the shock, the devices would produce too much noise which would be a health hazard for the workers and anyone around the machine or even the factory.

The rubber isolator bushings are extremely durable, and they can withstand a lot of pressure, harsh conditions, extreme weather, and they can even be in constant contact with water or chemicals without getting damaged, broken, or torn. These units can come in different shapes, sizes, and with different designs, and you are also free to choose or customize the colors. We are here to aid you in choosing the right parts for your needs, so you don’t have to risk making the wrong choice and having to replace everything later.

Our Products

Rubber Vibration Mounts E

Rubber Mountings D

Vibration Isolators C

Anti-Vibration Rubber Mounts B

Vibration Damping Mounts A

Material: EPDM/NR/SBR/Silicone/FKM/NBR/CR
Hardness: 30-90 Shore A
Temperature Rang: -70℃ to 220℃, we can customize products with a temperature resistance of more than 300℃.
Colors: Black, white. Custom colors available to your Pantone color code.
Custom service available, we can offer special rubber mounts according to your requirements.

Email:sales@etolrubber.com

The post Rubber isolator bushings appeared first on Rubber Parts Manufacutre.

Rubber Isolation Grommets

Sat, 04 Sep 2021 01:43:39 +0000

Professional Silicone Rubber Parts Manufacturers

PRODUCT CATALOG

[contact-form-7]

Rubber Isolation Grommets

When we say rubber insulation grommets – we immediately think of sealing and plugging holes and water insulation. While this may be one kind of explanation, it’s not quite that simple. Namely, rubber insulation grommets have a huge application and multipurpose use. They are produced in various shapes and colors – they are used almost everywhere from the car industry, through children’s toys, to the food industry. But let’s go in order.

Rubber isolation grommets primarily serve to prevent damage – and since they are waterproof, this means that water cannot penetrate and cause additional damage. Each toilet, shower, drain, etc. – contains one or more of these rubber insulation grommets. They are fixed and they are preventing water from circulating in places where it’s not supposed to. Due to their flexibility and elasticity, they are very practical and useful. If necessary, and according to the purpose, they can be made of harder but also softer rubber.

Due to their properties, rubber insulation grommets are often used in the electrical industry when protecting cables or working with high voltage current – where rubber protects but also insulates cables, accumulators, tanks, or other appliances from contact with each other and contact with water. Rubber insulation grommets withstand both high and low temperatures, so in the automotive industry, they are used as inserts for most cables and screws in the engine – or the rest of the parts for cars or other means of transport.

Speaking of protection, even special working footwear is made with rubber insulating crampons that will protect the wearer. However, rubber grommets are most often used as sealants on various appliances from TVs to kitchen appliances that are in frequent contact with water – to cars where they serve as protective plugs and prevent electronics from coming into contact with water or oil.

Their use and purpose are simple and you can’t even imagine how useful and necessary it is in everyday life. You certainly encounter rubber insulation grommets every day and you may not have even thought about it this way.

Our Products

Rubber Vibration Mounts E

Rubber Mountings D

Vibration Isolators C

Anti-Vibration Rubber Mounts B

Vibration Damping Mounts A

Material: EPDM/NR/SBR/Silicone/FKM/NBR/CR
Hardness: 30-90 Shore A
Temperature Rang: -70℃ to 220℃, we can customize products with a temperature resistance of more than 300℃.
Colors: Black, white. Custom colors available to your Pantone color code.
Custom service available, we can offer special rubber mounts according to your requirements.

Email:sales@etolrubber.com

The post Rubber Isolation Grommets appeared first on Rubber Parts Manufacutre.