Rubber compression boots
Rubber compression boots have a very wide purpose and can be used as insulators and seals from dust, external effects and compression. Depending on the manufacturer and the wishes of customers, they can be made in different forms, already prepared or according to a specific design. Rubber compression boots are generally made of solid rubber that is very flexible. It allows a certain range of motion and protects against damage the pipe around it or two parts of the machine that connects.
They are used to protect moving mechanical parts from strong compression and wear. Their design is not much different from standard rubber boots, but its rubber is much more durable and can withstand and stabilize stronger pressure. Rubber compression boots are designed as a hollow tube that has folds or curves on it. With the help of a curve and a very resistant but flexible rubber, it absorbs movements in the direction of the longitudinal axis. The movement is compressed by shortening the bellows in length. Then the bellows are stronger and block further movement. Movement can also be extensive when the bellows extend in length. These rubber compressive boots can move both laterally and angularly, depending on the use and the pressure it can withstand.
Excessive stretching can damage the folds on rubber boots. Also, proper storage of these bellows is of great importance for their good functioning and long shelf life. It is necessary to avoid contact with sharp and pointed objects as well as any type of physical wear, before and during use.
The type and strength of these compression boots should be chosen based on the pressure of the machine on which it is installed and the purpose. It is very important that this bellows are not compressed or stretched during installation. When you install it, it must be in its original factory release in order to perform its function well.
Product specifications
- Product form
- Flexible protective boot with a moving section
- Dimensions to confirm
- End interfaces, free length, compressed length and extended length.
- Exposure to evaluate
- Dust or debris. Validate the selected material under the combined conditions.
- Movement discussed
- Axial compression and extension and angular flexing. Check fold clearance at both travel limits and define the cycle requirement.
- Motion envelope
- Define axial travel, articulation and clearance around the folds throughout the stroke.
Need a quote or a custom part?
Send your requirements, drawings or samples to discuss standard and custom silicone rubber parts.
Email us[email protected]